Beading & Parting /
Bedan Tool /
Extra Heavy Duty Scrapers /
Spiralling & Texturing Tools /
Roughing-Out Gouge /
Ring Tools /
Sizing Tool /
Multi-Tip Hollowing Tool – RS200KT /
Tool Tip Holder /
Bowl Gouges /
Spindle Gouges /
Skew Chisels /
Parting Tools /
Woodturning Tool Sets /
Scraping Tools /
EZE-LAP Diamond Needle File Set /
Micro tool system /
Mushroom Tool /
Robert Sorby’s Excelsior Woodturning Tool Range /
Crush Grind Salt & Pepper Mills /
Sovereign Ultima hollowing system /
TurnMaster & Sovereign Deluxe Boxed Tool Sets /
Medium Sovereign Ultima hollowing system
The Sovereign Ultima Hollowing System is the latest product from the Robert Sorby factory in Sheffield. It forms part of the Sovereign System but is also a stand-alone tool in its own right. Available in two sizes it enables woodturners to produce hollow forms up to 11" (275mm) with the small version and up to 16" (400mm) with the medium in both wet and dry woods. It has a cutter system that slices through the wood rather than scraping and the clever design allows the shavings to clear without clogging. It is equally effective on bowl grain work as well as end-grain projects. The cutter is able to make light or heavy cuts and the unique micro adjust feature enables the turner to set the cutter depth with ease.
The cutter is manufactured from high grade HSS and as only one third is exposed at any time it can be rotated twice through 120 degrees before it needs to be re-sharpened. The cutter is easy to sharpen with a diamond hone and can be easily removed if required. A cutter sharpening jig is available as an optional extra (SOV-ULTCSJ). Manufactured from phosphor bronze the jig rotates freely within its sleeve and enables the turner to sharpen either with a diamond hone, bench grinder or ProEdge. The jig will also accommodate other full round cutters.
The articulating head and link system enables the turner to produce a variety of hollow form shapes from the traditional vase to the squashed form. An additional link (SOV-ULTLM) can be added to achieve extreme undercutting. If the link is removed then the Ultima can be used as a probe for straight sided hollowing. An optional Ultima finishing head (SOV-ULTFCHM) can be fitted, which will allow the turner to achieve a smooth surface finish. Other cutters are available that will fit to enable more advanced shape finishing.
If you already have the Sovereign handle and wish to advance your system. We supply the individual blades. The smaller blade with 1/2" diameter shaft measures 13" overall. The medium blade has a 5/8" shaft and measures 18" overall.
Scroll down towards the bottom of this page to see the additional accessories available for the Sovereign Ultima Hollowing System