Marking-out & Measuring Tools

Bar-Man™ Clamps /  HoneRite Gold /  ToolGuard VCI /  Robert Sorby Sharpening/Honing Kit /  Deluxe Revolving Centre System /  Protractor /  Stainless Steel Rule /  Marking Knife /  Universal Grinding Gauge /  Universal Grinding Gauge /  Beading & Parting /  Bedan Tool /  Extra Heavy Duty Scrapers /  The Woodturners Love Goblet /  Spiralling & Texturing Tools /  Spindlemaster /   /  Chattertool /  Pen Turning 3 Piece Tool Set /  Sawtooth Forstner Bits /  Hermes RB406 J-Flex Abrasives /  Hermes BW/RB General Woodworking Abrasive /  Roughing-Out Gouge /  Ring Tools /  Original Stebcentre /  Steb Drive /  Revolving Stebcentre /  Woodworkers HSS Countersink /  Midi Bar-Man™ Clamps /  4 Piece Clamp Set 4 in 1 /  Clamp N Spread /  Liberon Super Wood Glue /  Clamp N Vise™ /  Sizing Tool /  Universal Pen Mandrel Kit /  Wheel Dressers /  Carpenters’ Pinchers /  Push Stick /  Push Stick /  Set of 3 Cabinet Scrapers /  Hollowmaster /  Rosewood Handled Marking Knife /  Yew Log-Small Table Clock /  Masur Birch Natural Edge Bowl /  Masur Birch Natural Edge Hollow Form /  Segmented Small Bowl /  Table Lamp /  Lace Bobbin Drive /  End Seal /  EZE-LAP Diamond Needle File Set /  Heavy Duty Drill Vice /  Patriot Woodturning Chuck /  Bowl Reversing Jaws /  RSJLN – Long Nose Jaws /  Custom Jaws /  Drive Centre /  Safety Equipment Starter Set /  Chuck Insert /  Chuck Exerts /  Beam Compass Heads /  Glue Gun /  Snug-Plug Cutters – set of 3 /  Carvin’ Jack /  Gorilla Tape /  Honing Guide Mark II /  Gorilla Glue /  Bevel Setter /  Set of 7 Auger Gimlets /  Carpenter’s Gauge /  Rule Magnifier /  Heavy Duty Elasticated Braces /  Gorilla Glue & Gorilla Tape Offer /  Flexcut™ SK108 – 20 Piece and 4 Piece Carving Sets /  Chair Doctor™ Pro /  Arbortech Fully Assembled Mini-Carver Power Tool /  Flexishaft MICROMOT 110/P /  Proxxon 110/P Flexi-Shaft /  Proxxon Motorised Caver MOS. 28 644 /  Veritas Dovetail Saw and Guide /  Magnetic Corner Chisel /  4-Way Speed Frame Clamp with Extension Rods /  The Woodturners Love Goblet / 2 /  Cyanoacrylate Super Glue /  Accelerator for Cyanoacrylate Superglue /  De-Bonder for Cyanoacrylate Superglue /  Centre Steady /  VERITAS® Beam Compass /  Pen Blank Centering Drilling Vise /  Pen Blank Central Drilling Vise /  Multi-Tip Hollowing Tool – RS200KT /  Abrasive Belt / Disc Cleaner /  Abrasive Belt / Disc Cleaner /  Veritas® Ruler Stop /  Restore Rust Remover /  HoneRite #1 /  ProtecTool - Wax /  GreaseXtra /  Restore Pre-Clean /  Shield Technology Restore Special Offer /  MetalGuard ULTRA /  Wobble Chuck /  Flexcut- KN100 Knife Set /  Micro Sandmaster /  Colt Twinland Lip & Spur Wood Drill Bit Set /  Gorilla Glue Fast Cure /  Gorilla Glue Fast Cure /  Micro Spindle Set /  Four-Fold Wooden Rule /  Nobex Framing Cord Clamp /  RSJP-Pin Jaws 1” (25mm) /  Precision Boring System /  Drive Centres /  TCT Hinge Sinkers /  Restore – Blade & Bit Cleaner /  Restore – Blade & Bit Cleaner /  Long Series HSS Tin Coated Drill Bits /  Nobex Do It Mitre Saw /  Arbortech Industrial TCT Mini Cutter for Mini Carver /  Arbortech Industrial Carver /  Chestnut Products Buffing Kit /  Easybeader /  Microplane Rotary Shaper /  Microplane Rotary Shaper /  Long Grind Jig /  Tool Tip Holder /  Tool Tip Holder /  Colt MaxiCut Woodturning – Drilling / Boring Set /  Gorilla Super Glue /  Cabinet Makers Screwdriver Set /  Veritas Carver's Vice /  Creative Pen Turning HD – DVD /  Restore Rust Remover Gel /  Proxxon MOS Carver & Flexcut RG100 Power Carving Deluxe Set (14 Piece) Package /  MD2G Moisture Meter /  Jet AFS-500 Air Filtration System /  Jet DC1100A Extractor /  Nobex Proman Mitre Saw /  Multi – Chuck Drive Centres /  Pen Jaws /  Multi-Pack – Abrasive Rolls /  Pen Mandrel Support /  Reduced Shank Drill Bits /  Axminster Evolution Live Revolving Centre /  Flexcut KN250 Deluxe Knife Set /  Banksia Nut /  Burnishing Cream /  Finial Support Mandrel Kit /  Finial Support Mandrel Kit /  Veritas Tapered Snug Plug Cutter & Flush Cutting Saw - PACKAGE DEAL /  Wooden Mallet /  Deluxe Revolving Centre System /  Jet JWBS-14Q Bandsaw /  Pulling Saws /  Vernier Depth Gauge /  Alternative Ivory, Horn & Tortoise Shell /  Boa Constrictor /  NOVA 10-in-1 Chuck Gauge Accessory /  Classic Woodcarver’s Vice /  CA – UK: Cyanoacrylate Glues /  CA – UK: Cyanoacrylate Glues /  Self – Centering Hinge Drill Bit /  Flexcut Chip Carving Set /  3 STEP LATHE BUFFING & POLISHING SYSTEM  /  Tormek T-8 Sharpening System & Woodturner's Kit - PACKAGE DEAL /  Accessories /  URKO Clamping Systems / 



Calipers – Dividers

NAME:Inside Calipers

High quality, well engineered the inside callipers are ideally suited to the requirements of the woodturner used for measuring the internal dimensions and for general woodworking projects, fitted with a screw for fine adjustments, which also ensures that the dimension set cannot be accidentally moved. In addition to woodturning the Inside Calipers are suitable for all types of workshop, classroom and office use. Supplied in 3 different sizes – 4” – 6” and 8”



Code Size Description Price
CI51/4 4 Inside Calipers-4" £6.25
CI51/6 6 Inside Calipers-6" £7.87
CI51/8 8 Inside Calipers-8" £9.99


NAME:Outside Calipers

The Planet Manufacturing Outside Calipers are ideally suited to the requirements of the woodturning, and other woodworking projects,   the screw adjustment ensures that the dimension set cannot be accidentally moved



Code Size Description Price
CO52/4 4 Outside Calipers-4" £6.25
CO52/6 6 Outside Calipers-6" £7.87
CO52/8 8 Outside Calipers-8" £9.99


NAME:Double Ended Calipers

This set of well engineered double ended outside calipers manufactured by Planet Manufacturing are plated to resist corrosion and are fitted with a large clamp knob for ease of operation
•     Double ended outside calliper
•     Secure locking point
•     Overall length 360mm



Code Size Description Price
CDE/7 360mm Double Ended Calipers £11.50


NAME:Inside/Outside Calipers

These new enhanced designed set of large Inside/Outside Calipers from Planet Manufacturing, which are plated to resist corrosion and is fitted with a large clamp knob for ease of operation; these are a must for the woodturner or anyone who needs to make accurate measurements.   With the added benefit of the large clamp knob, they enable you to set the measurement without fear of losing the dimension set

I use these Calipers all the time in my woodturning workshop to obtain the correct, desired wall thickness of the walls to the hollow forms and bowl work, especially when I am creating deep hollow foams with accurate results every time.

•     Overall length 430mm



Code Size Description Price
C10/7 430mm Inside/Outside Calipers £11.50


NAME:12” Firm Jointed Outside Calipers

The Planet Manufacturing large 12" Outside Calipers features a large firm joint and is 12" from joint to tip



Code Size Description Price
CO331/12 12 12" Firm-Joint outside Calipers £5.25


NAME:Dividers

These set of well engineered dividers manufactured by Planet Manufacturing, apart from general workshop measuring and drawing uses, they are also ideally suited to the requirements of the woodturner; the screw adjustment ensures that the dimension set cannot be accidentally moved



Code Size Description Price
CD50/6 6” Dividers £4.15


NAME:Set of Calipers & Dividers

The Planet Manufacturing Calipers and Dividers are ideally suited to the requirements of the woodturning, and other woodworking projects,   the screw adjustment ensures that the dimension set cannot be accidentally moved

This special offer set of three calipers consists of the following:
•     6” Outside Calipers
•     6” Inside Calipers
•     6” Dividers



Code Size Description Price
3PSC/6 6" 6" Set of Calipers & Dividers £9.99


NAME:All Steel Electronic Digital Caliper

A high precision digital readout caliper with a very solid all stainless steel construction. Zero can be set at any point along the range, and the display is easily switched from a metric to an imperial reading. Use for precise measurements of external, internal and depth from zero to 150mm (6" by 0.01mm (0.001").



Code Size Description Price
200398 0 to 150mm (6") Electronic Digital Caliper - 150mm (6") £22.99


NAME:Battery (SR44) for the Digital Electronic Calipers

Replacement / Spare Battery (SR44) for the Digital Electronic Calipers



Code Size Description Price
810367 SR44 Battery (SR44) for the Digital Electronic Calipers £1.92


NAME:Empire 300mm Compass

Key Features:

•     Capable of drawing a circle up to 650mm diameter
•     Heat treated and polished steel
•     Hardened and tempered spring steel
•     Uses standard pencil
•     Description

This compass has the capability of drawing a circle up to 650mm (25") in diameter. This is a very useful tool when setting out larger diameter curves. It is equally useful for dividing or laying out distances.

An ideal solution for marking out the circle of the larger sized woodturning blanks enabling you to find not only the centre of the blank but also in locating and deciding the best part of the blank to use

The legs are heat treated and polished steel with a hardened and tempered spring for long life and reliability. The holder takes a standard pencil.



Code Size Description Price
504044 300mm(12”) Empire 300mm - (12") Compass £18.25


NAME:Jeweller's Brass Pocket Caliper

These handy pocket calipers are made from solid brass. The slide runs in a milled dovetail slot giving a smooth action. The caliper features permanently engraved graduations in both metric and imperial. The imperial scale is direct reading 3.1/4" x 1/16"; whilst the 80mm metric features a vernier scale readable to 0.1mm. No one is pretending this is a high precision instrument, but for quick external measurements or quick comparisons, it is an extremely handy tool. Unlike many poor quality copies, these calipers perform very well.

Dimensions: Length overall 100mm – Jaw depth 20mm, for external measurements.

Also an handy tool to have in your turning smock pocket for quick and easy measuring of work being turned at the lathe such as sizing the foot or recess of the work to fit on to the chuck, the thickness of rims and so on

•     Solid brass, handy pocket caliper
•     Milled dovetail slot gives smooth action
•     Permanently engraved graduations in both metric and imperial
•     Imperial scale direct reading 3.1/4" x 1/16"
•     80mm metric scale with vernier scale readable to 0.1mm
•     Ideal tool for quick external measurements or quick comparisons
•     Length 100mm, jaw depth 20mm



Code Size Description Price
502427 80mm Jeweller's Brass Pocket Caliper £9.46



 

YOUR ACCOUNT





SPECIAL OFFERS

On Offer Today:

Elipse P3 (R) and Elipse P3 (R) Nuisance Odour Carbon Replacement Filters





PRODUCT SEARCH

Enter Product Search:



COMMENTS

Just a quick note to say thank you. All items arrived safely and quickly. Very pleased with purchases and delighted that there are still businesses out there that believe in excellent service, good communication, dealing with customers as individual people and giving more than expected - and do it, rather than just saying it. With best regards
- David N