Apart from your lathe your woodturning chuck and its accessories are probably the most expensive items in your woodturning tool box. Just like your woodturning tools which will require cleaning and sharpening to keep them in a tip top condition, your chuck requires the same amount of attention, you should always check your chuck to ensure that it is safe to use, before and after each time you use your chuck.
After cleaning and checking the chuck ensuring that the jaw slides are fitted correctly and they open and close easily using the chuck key and after the jaws are fitted, ensure that each of the mounting screws are properly fitted and the jaws meet together when closed. If you are unsure then you should always read and use the instructions as laid out in the woodturning chucks manual / instruction leaflet that came with the chuck
By using the Axcaliber Dry Lubricant this will help to maintain the chuck in a good condition. The lubricant as been formulated to minimise wear and reduce corrosion on the chuck and its moving parts, it is a dry PTFE based lubricating film, which is unaffected by water, oil or solvents and will not attract dust.
The Axcaliber Dry Lubricant is supplied in a 400ml aerosol spray can
NAME:Restore – Blade & Bit Cleaner
The Shield Technology Restore Blade & Bit Cleaner is a Fast Acting – Trade Strength formula for efficient cleaning
which removes pitch and resin from your tools and machinery and after cleaning the items are protected against short term corrosion. This solution is Economical and Biodegradable
The Shield Technology Restore Blade & Bit Cleaner is supplied in an easy to use 500ml spray bottle
On Offer Today:
Universal Pen Mandrel Kit
Hi David, As you requested,your mail. I will take this opportunity,to thank you for every thing you have done for me.Without your assistance,I would still be struggling.I can not thank you enough. All the very best for your business and your health. - Vernon Bowker