Pen Making – Gifts & Games

Bar-Man™ Clamps /  HoneRite Gold /  ToolGuard VCI /  Robert Sorby Sharpening/Honing Kit /  Deluxe Revolving Centre System /  Protractor /  Stainless Steel Rule /  Marking Knife /  Universal Grinding Gauge /  Universal Grinding Gauge /  Beading & Parting /  Bedan Tool /  Extra Heavy Duty Scrapers /  The Woodturners Love Goblet /  Spiralling & Texturing Tools /  Spindlemaster /   /  Chattertool /  Pen Turning 3 Piece Tool Set /  Sawtooth Forstner Bits /  Hermes RB406 J-Flex Abrasives /  Hermes BW/RB General Woodworking Abrasive /  Roughing-Out Gouge /  Ring Tools /  Original Stebcentre /  Steb Drive /  Revolving Stebcentre /  Woodworkers HSS Countersink /  Midi Bar-Man™ Clamps /  4 Piece Clamp Set 4 in 1 /  Clamp N Spread /  Liberon Super Wood Glue /  Clamp N Vise™ /  Sizing Tool /  Universal Pen Mandrel Kit /  Wheel Dressers /  Carpenters’ Pinchers /  Push Stick /  Push Stick /  Set of 3 Cabinet Scrapers /  Hollowmaster /  Rosewood Handled Marking Knife /  Yew Log-Small Table Clock /  Masur Birch Natural Edge Bowl /  Masur Birch Natural Edge Hollow Form /  Segmented Small Bowl /  Table Lamp /  Lace Bobbin Drive /  End Seal /  EZE-LAP Diamond Needle File Set /  Heavy Duty Drill Vice /  Patriot Woodturning Chuck /  Bowl Reversing Jaws /  RSJLN – Long Nose Jaws /  Custom Jaws /  Drive Centre /  Safety Equipment Starter Set /  Chuck Insert /  Chuck Exerts /  Beam Compass Heads /  Glue Gun /  Snug-Plug Cutters – set of 3 /  Carvin’ Jack /  Gorilla Tape /  Honing Guide Mark II /  Gorilla Glue /  Bevel Setter /  Set of 7 Auger Gimlets /  Carpenter’s Gauge /  Rule Magnifier /  Heavy Duty Elasticated Braces /  Gorilla Glue & Gorilla Tape Offer /  Flexcut™ SK108 – 20 Piece and 4 Piece Carving Sets /  Chair Doctor™ Pro /  Arbortech Fully Assembled Mini-Carver Power Tool /  Flexishaft MICROMOT 110/P /  Proxxon 110/P Flexi-Shaft /  Proxxon Motorised Caver MOS. 28 644 /  Veritas Dovetail Saw and Guide /  Magnetic Corner Chisel /  4-Way Speed Frame Clamp with Extension Rods /  The Woodturners Love Goblet / 2 /  Cyanoacrylate Super Glue /  Accelerator for Cyanoacrylate Superglue /  De-Bonder for Cyanoacrylate Superglue /  Centre Steady /  VERITAS® Beam Compass /  Pen Blank Centering Drilling Vise /  Pen Blank Central Drilling Vise /  Multi-Tip Hollowing Tool – RS200KT /  Abrasive Belt / Disc Cleaner /  Abrasive Belt / Disc Cleaner /  Veritas® Ruler Stop /  Restore Rust Remover /  HoneRite #1 /  ProtecTool - Wax /  GreaseXtra /  Restore Pre-Clean /  Shield Technology Restore Special Offer /  MetalGuard ULTRA /  Wobble Chuck /  Flexcut- KN100 Knife Set /  Micro Sandmaster /  Colt Twinland Lip & Spur Wood Drill Bit Set /  Gorilla Glue Fast Cure /  Gorilla Glue Fast Cure /  Micro Spindle Set /  Four-Fold Wooden Rule /  Nobex Framing Cord Clamp /  RSJP-Pin Jaws 1” (25mm) /  Precision Boring System /  Drive Centres /  TCT Hinge Sinkers /  Restore – Blade & Bit Cleaner /  Restore – Blade & Bit Cleaner /  Long Series HSS Tin Coated Drill Bits /  Nobex Do It Mitre Saw /  Arbortech Industrial TCT Mini Cutter for Mini Carver /  Arbortech Industrial Carver /  Chestnut Products Buffing Kit /  Easybeader /  Microplane Rotary Shaper /  Microplane Rotary Shaper /  Long Grind Jig /  Tool Tip Holder /  Tool Tip Holder /  Colt MaxiCut Woodturning – Drilling / Boring Set /  Gorilla Super Glue /  Cabinet Makers Screwdriver Set /  Veritas Carver's Vice /  Creative Pen Turning HD – DVD /  Restore Rust Remover Gel /  Proxxon MOS Carver & Flexcut RG100 Power Carving Deluxe Set (14 Piece) Package /  MD2G Moisture Meter /  Jet AFS-500 Air Filtration System /  Jet DC1100A Extractor /  Nobex Proman Mitre Saw /  Multi – Chuck Drive Centres /  Pen Jaws /  Multi-Pack – Abrasive Rolls /  Pen Mandrel Support /  Reduced Shank Drill Bits /  Axminster Evolution Live Revolving Centre /  Flexcut KN250 Deluxe Knife Set /  Banksia Nut /  Burnishing Cream /  Finial Support Mandrel Kit /  Finial Support Mandrel Kit /  Veritas Tapered Snug Plug Cutter & Flush Cutting Saw - PACKAGE DEAL /  Wooden Mallet /  Deluxe Revolving Centre System /  Jet JWBS-14Q Bandsaw /  Pulling Saws /  Vernier Depth Gauge /  Alternative Ivory, Horn & Tortoise Shell /  Boa Constrictor /  NOVA 10-in-1 Chuck Gauge Accessory /  Classic Woodcarver’s Vice /  CA – UK: Cyanoacrylate Glues /  CA – UK: Cyanoacrylate Glues /  Self – Centering Hinge Drill Bit /  Flexcut Chip Carving Set /  3 STEP LATHE BUFFING & POLISHING SYSTEM  /  Tormek T-8 Sharpening System & Woodturner's Kit - PACKAGE DEAL /  Accessories /  URKO Clamping Systems / 



Pen Mandrel Spares – Bushing Sets & Accessories

NAME:Pen Mandrel Spares

Sometimes even the tidiest amongst can sometimes misplace those small bits and pieces, in the tool box and amongst the wood shavings or even damage the spacers and cones while in the process of turning a pen on the lathe. Rather than having to purchase a complete new pen turning kit, we are able to supply the parallel spacers in sets of 3 the cones in sets of 4, plus a pack containing 2 cones, 2 spacers and 1 knurled brass clamping nut



Code Size Description Price
PM3S Set of 3 Set of 3 parallel spacers £3.45
PM4C Set of 4 Set of 4 cones £4.62
PM5X ------ 2 cones, 2 spacers, 1 knurled brass clamping nut £6.25


NAME:10mm Pen Accessory Kit

The AK10 – 10mm pen accessory kit consists of 3 HSS drill bits, 9.8 - 9.9 and 10mm, plus 2 end spacers and 1 centre spacer. Use the AK10 kit when turning 10mm pens and other similar projects on the rotur / Planet pen turning kit.

Prepare the pen blank as normal inserting a 10mm brass tube into the pen blank. Simply slide one end spacer onto the shaft of the pen mandrel, slide on the prepared pen blank and then slide on the other end spacer tighten everything and turn your pen as normal. The centre spacer enables you to turn the two halves of the pen blank at the same time, which is ideal if you have a number of pens to turn or if you want to ensure that the two halves are turned to the exact same diameter. The kit is supplied in a sturdy container to help you keep your pen making accessories clean and together



Code Size Description Price
AK10 10mm 10mm Pen Accessory Kit £17.99


NAME:Majestic Squire Pen Bushing Set

When turning the pen kits such as the Majestic Squire Pen kits – item No: 951113. We recommend that this bushing set 951114 is used, which simply slide on to the shaft of the pen mandrel giving you the correct diameter to allow the pen blank to fit securely and turned safely on the lathe



Code Size Description Price
951114 ------ Majestic Squire Pen Bushing Set £3.16


NAME:Cap Adjuster Tool

We all know what’s it is like to put the finished pen together and then realize that the two halves do not fit together correctly; the top of the pen does not push tight on to the bottom half. Rather than using a screw driver or something similar and end up trashing your new pen, we recommend that the Cap Adjuster tool is used, this handy little device has four small prongs at the end, these simply fit neatly in to the recesses inside the top of the white plastic nib cap, us the Cap Adjuster tool to attach the plastic nib cap to the pen cap and pocket clip and then turn it either left or right until you get the correct fitting and the two halves of the pen fit neatly together

•     To adjust the nib caps of the Rollerball and Fountain pens
•     Four prongs locate into the corresponding recesses within the nib cap
•     Simply a must for the avid pen tuner



Code Size Description Price
210083 ------ Cap Adjuster Tool £4.75


NAME:Bushing Set, for use with the Roller Ball & Fountain Pen Kits

When turning the Roller Ball and Fountain Pen Kits the following bushing set (Item No 310387) are recommended, to hold the pen blank securely on to the pen mandrel shaft. The bushes are fitted to each end of the prepared pen blank, allowing the pen blank to simply slide on to the shaft of the pen mandrel. Allowing you to the turn the pen securely and safely to the required diameter / shape and size



Code Size Description Price
310387 ------ Bushing Set, for use with the Roller Ball & Fountain Pen Kits £4.99


NAME:Bushing Set for the Stylish – Twist Top Ball Point Pen making kit – 0749

When turning the 0749 - Stylish - Twist Top Ball Point Pen making kit, the following bushing set (item No: 701605) is recommended, to hold the pen blank securely on to the pen mandrel shaft. The bushes are fitted to each end of the pen blank, allowing the pen blank to simply slide on to the shaft of the pen mandrel. Allowing you to the turn the pen blank safely to the required diameter / shape and size.



Code Size Description Price
701605 ------ Bushing Set for the Stylish – Twist Top Ball Point Pen making kit – 0749 £3.16


NAME:Bushing Set for Slimline Pen Kits

The use of a pen mandrel with the correct bushing set makes pen making and turning project kits an easy process. Simply use the bushings on the mandrel as a reference to turn your blanks down to the correct diameter.



Code Size Description Price
953311 ------ Bushing Set for Slimline Pen Kits £5.99


NAME:Bushing Set for Ball Point Pen with Chrome Cap

The use of a pen mandrel with the correct bushing set makes pen making and turning project kits a much easier process. Simply use the bushings on the mandrel as a reference to turn your blanks down to the correct diameter. We recommend the use of this bushing set when turning the ball point pen with chrome cap – pen kits (600748)



Code Size Description Price
701604 ------ Bushing Set for Ball Point Pen with Chrome Cap £2.99



 

YOUR ACCOUNT





SPECIAL OFFERS

On Offer Today:

Creative Pen Turning HD – DVD





PRODUCT SEARCH

Enter Product Search:



COMMENTS

I have only just come accross your company, and ordered a very small item, but I must say that the ammount of time spent talking to me on the phone is priceless. Thanks, and good luck. Will definatly be back for more goods.
- STEVE lEWIS